ST Sound & Light Sdn Bhd

L Series

L112

The L112 is a two way passive mid-high loudspeaker. It's formed by a high output 12”, coupled to an exponential horn, and a 2” compression driver connected to a uniform 60ºx40º dispersion exponential horn. This trapezoidal enclosure it's designed for very high output requirements, and a mid to long through application. The TS112 is madeof birch plywood and painted in weatherproof texture black finish as standard.

L1000

L100 is a two way compact full range system, tuned with two loudspeakers, one 15" and one 12", passively crossovered with a 1" compression driver, attached to the front of the 12" and coupled to an exponential horn. The shape of the cabinet is trapezoidal, and it's coated in weatherproof texture black finish.

L2122VLT

The L2122VLT is a two way activ e system, equipped with two powerful 12" and a 2" neodimium compression driver. The system has been designed for very long throw applications, in the frequency band from 100 Hz to 17.5KHz. The two 12" are attached to a long exponential non resonant wooden horn. Due to it's length, and to maximize the upper usable bandwidth of the mid section, two phase corrector dev ices are located at the throat. The 2" neodimium drivers coupled to a non resonant aluminium-wooden horn, and protected by a PSS active circuit. The cabi net is constructed in birch plywood covered with a special weather proof tex ture black finish. Castors are offered as an option.

L2122LT

The L2122LT is a 3 way (two active and one passive) mid-high cabinet.The mid section consists of two extremelly powerful 12”, coupled to a long throw wooden non resonant horn. The high section consist of a 2” compression driver and two 1”, filtered passively. These 3 compression drivers are protected with an active PSS device that prev ent failure situations. The 2” is coupled to a non resonant wooden-aluminium horn, while the 1” are attached to the throat of the 12” horns.The frequency response is very flat without any colouration.Ideally suited f or large liv e and disco reinforcements, where very high pressure levels are required.It’s made of birch plywood and painted in weather proof texture black finish.Can incorporate castors but as an option.